Lock Troubleshooting | Sun Welding Safe Company

Sun Welding Safe Company

LaGard / KabaMas 800-950-4744 Troubleshooting - LaGard/KabaMas
BigRed 877-423-8073 Troubleshooting - BigRed
Sargent & Greenleaf 800-826-7652 Troubleshooting - Sargent&Greenleaf
LP Locks 949-362-8977 Troubleshooting - LP Locks
SecuRam 805-988-8088 Troubleshooting - SecuRam
Amphion 800-520-2677 Troubleshooting - Amphion

 

S&G Combination Lock Support


Check out www.sglockhelp.com

For Combination Lock Instructions

Sargent & Greenleaf 6741 Combination lock:
1. Turn the dial to the LEFT (counter clock-wise), stopping when _(1st number)_ is aligned with the opening index the FOURTH time.
2. Turn the dial to the RIGHT (clockwise), stopping when _(2nd number)_ is aligned with the opening index the THIRD time.
3. Turn the dial to the LEFT (counter clock-wise), stopping when _(3rd number)_ is aligned with the opening index the SECOND time.
4.Turn the dial to the RIGHT (clockwise), until the dial stops, and the bolt retracts.

Using the Day Key: Most safes come with a key locking dial. Close the door and turn the safe handle. To lock the dial, insert the dial key and turn the key a half a turn clockwise. Turn the dial to the right (clockwise). The dial should stop around “87”.

Note: The day key feature is not suggested to use as the main source of security.

  1. Rotate the dial counterclockwise to the number 0.
  2. Insert the key and turn it 180 degrees counterclockwise until it stops.
  3. Remove the key and verify the dial is locked by turning the handle.

 

S&G Electronic Lock Support

Check out www.sglockhelp.com

For Electronic Lock Instructions

Sargent & Greenleaf 6120 Electronic Lock:
1. Press 1-2-3-4-5-6-#, wait for tone.
2. Turn handle

 

LP Combination Lock Support


Check out www.lplocks.com

For Combination Lock Instructions

LP Combination lock:
1. Turn the dial to the LEFT (counter clock-wise), stopping when _(1st number)_ is aligned with the opening index the FOURTH time.
2. Turn the dial to the RIGHT (clockwise), stopping when _(2nd number)_ is aligned with the opening index the THIRD time.
3. Turn the dial to the LEFT (counter clock-wise), stopping when _(3rd number)_ is aligned with the opening index the SECOND time.
4.Turn the dial to the RIGHT (clockwise), until the dial stops, and the bolt retracts.

5. Turn the handle and open the safe.

 

LP Electronic Lock Support

Check out www.lplocks.com

For Electronic Lock Instructions "Base Line Key Pad - Dual User Set-Up Instructions"

 

LaGard Electronic Lock Support

Check out www.kaba-mas.com

For Electronic Lock Instructions

LaGard Basic 3715 Electronic Lock:
1. Press 1-2-3-4-5-6, wait for tone.
2. Turn handle

 

BigRed Lock Support

BigRed Combination lock:
1. Turn the dial to the LEFT (counter clock-wise), stopping when _(1st number)_ is aligned with the opening index the FOURTH time.
2. Turn the dial to the RIGHT (clockwise), stopping when _(2nd number)_ is aligned with the opening index the THIRD time.
3. Turn the dial to the LEFT (counter clock-wise), stopping when _(3rd number)_ is aligned with the opening index the SECOND time.
4.Turn the dial to the RIGHT (clockwise), until the dial stops, and the bolt retracts.

Using the Day Key: Most safes come with a key locking dial. Close the door and turn the safe handle. To lock the dial, insert the dial key and turn the key a half a turn clockwise. Turn the dial to the right (clockwise). The dial should stop around “87”.

Note: The day key feature is not suggested to use as the main source of security.

  1. Rotate the dial counterclockwise to the number 0.
  2. Insert the key and turn it 180 degrees counterclockwise until it stops.
  3. Remove the key and verify the dial is locked by turning the handle.

 

LaGard/KabaMas Lock Support

LaGard Combination lock (Redundant Lock):

1. Turn the dial to the RIGHT (clockwise), stopping when _(1st number)_ is aligned with the opening index the FIFTH time.
1. Turn the dial to the LEFT (counter clock-wise), stopping when _(2nd number)_ is aligned with the opening index the FOURTH time.
2. Turn the dial to the RIGHT (clockwise), stopping when _(3rd number)_ is aligned with the opening index the THIRD time.
3. Turn the dial to the LEFT (counter clock-wise), stopping when _(4th number)_ is aligned with the opening index the SECOND time.
4.Turn the dial to the RIGHT (clockwise), until the dial stops, and the bolt retracts.

 

LaGard/KabaMAs Electronic Lock Support
LaGard Electronic Lock:
1. Press 1-2-3-4-5-6, wait for tone.
2. Turn handle

 

 ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- -----------

Looking for a locksmith?

 

 

Shop Now - Sun Welding Safes - 805-584-6678

Have a question? Talk to one of our friendly safe experts now!

Latest Tweets