SOLID STEEL PLATESun Welding offers a solid 3/16" door and 12 Gauge (7/64") body on the Renegade Series. The door frame is made from a solid 3/16" frame for added security. Sun Welding doors won't flex like composite drywall doors. The door is recessed for additional security. In addition heat activated door seal that swells up to 7 times it's size to help seal out smoke and heat. The bodies are continuously welded.
> READ MORESun Welding has been manufacturing safes in Southern California since 1980. NEVER imported. Always providing American made manufacturing. The only parts we do not make are the locks and the handles.
> READ MORESun Welding offers heavy duty exterior hinge set with a full 180_ swing door. Allowing the door to be removable for transportation.
> READ MORELIFETIME WARRANTY
Sun Welding's warranty covers fire, theft, and burglary. We also offer extended warranties on locks and entry.
> READ MOREEXTERIOR FINISH
Sun Welding's matte finish is hand painted and finished with hand applied logos. Logo available in chrome, gold, or black. Standard with a single drop handle (adds 1.5" to depth), a finishing touch. > SEE
'OPTIONS' TAB
INTERIOR FINISH
Sun Welding lines the six interior walls with 5/8" fire board. See our fire 'Fire Rating' tab for more information. Then we hand build each interior from solid 3/4" particle board. It is then finished a velour fabric (variety of colors to choose from). With three standard rifle configurations to choose or a solid collector shelf interior we have the interior for you. We can also custom build an interior made to your specifications. See 'Interiors' tab to view our interior options. There are six pre-drilled mounting holes in the bottom of every safe for bolting the safe down to the floor. > SEE '
INTERIORS' TAB
BOLT WORKS & LINKAGE
Sun Welding's independent mounted bolting system stops a wide variety of attacks. Using a cam drive system to gear the linkage these parts will not break under pressure. The Renegade Series offers ten 1" diameter locking bolts (5 active door side, 5 dead hinge side). With two re-lockers, protected by Armor Hard Plate and second 1/2" steel plate the security is reinforced.
> READ MORE
GROUP 2 COMBINATION OR ELECTRONIC LOCK
Sun Welding gives the user the option of a UL listed group 2 combination mechanical lock or electronic lock. We offer a wide variety of manufactures from BigRed, S&G, LaGard, and SecuRam. In addition to EMP proof redundant style locks. > SEE '
OPTIONS' TAB
EXCEEDS UL RSC AND DOJ REQUIREMENTS
Every Sun Welding Safe exceeds the UL RSC and CA DOJ requirements. We tested out entry level safes to ensure the test requirements.
> READ MOREWANT TO READ MORE ON HOW SUN WELDING BUILDS EACH SAFE, VISIT HOW THEY ARE BUILT.FIRE RATINGThe fire insulation is used on all six sides of the safe. In addition heat sensitive expanding fire seal that swells up to eight times its size is used to fill in the space around the door. The fire rating test is completed by taking a safe and placing it in an oven that is 1200_ for 'x' minutes. At 'x' minutes the internal temperature of the safe reaches 350_. The actual burn time of the safe has many factors such as temperature of the fire and length of the fire.
_ 30 Minutes Standard weighs 680 lbs
_ Internal dimensions approximately 70.5"H x 34"W x 21.5"D
_ 60 Minute increases weight to 721 lbs
_ Internal dimensions approximately 69.25"H x 32.75"W x 20.25"D
_ 90 Minute increases weight to 910 lbs
_ Internal dimensions approximately 68"H x 31.5"W x 19"D
_ 120 Minute increases weight to 1025 lbs
_ Internal dimensions approximately 66.75"H x 30.25"W x 17.75"D
